6mm ARC/6.5 Grendel Mod-2 10-Round Magazine

I have used a couple different mags for my AR chambered in 6.5 Grendel, and this one is THE BEST! I have four of them, and they work perfectly. Holds rounds just right, inserts and stays in place properly, feeds perfectly, ejects perfectly. I use them in 2 different Aero M4E1 lowers. I have a magwell adapter for increased magwell size on each lower, and I have used these mags with the magwell installed, and without, and they function the same. The lips are firm, but not bulky. The follower is designed to work, and it does. When the mag is in, there is very minimal if any slop. I use them primarially on the Grendel, and I have used them on the 22ARC a little bit as well. Flawless performance with each lower, either caliber, every time. It's worth noting as well that I painted one of them with spraypaint designed for plastic, and it worked great! The magazine held the masking tape, and took the paint better than I thought it would. I changed the color of one from black to pink- Wife's Rifle- and after 2 coats, it was good. I did a third coat for good measure. Paint is holding up, with the minor about of use it has had so far. I have a couple for 5.56 as well, same performance.

Cannot get the E-lander metal mags to feed reliably. Tried the Amend 2 product with no problems whatsoever. Sometimes a challenge to load, but it's all in the technique. Will be purchasing more.

The finish perfect. They fit my lower and drop free when released. I haven't had the chance to go live with them as my build is only 95% finished.

I could only load 5 of 7.62x39, but a full 10 of Grendel. Its is well made and the follower is a neat dssign.

Well built magazine. New it has a very stiff magazine spring that I hope improves with use. Be nice to offer a magazine loading tool for this magazine. I have tried this magazine in my AR-15 rifles in 7.62x39, 6mm ARC and 6.5 Grendel with no issues. Great for sight in purpose.

Bought one to try, i’ve had major issues with the metal mags in my Aero build. This mag feeds and cycles flawlessly. Will be tossing the metal mags and ordering more of these.

I bought two(2)of these mags to try on my 6mm ARC. They have performed well no issues regarding feeding or ejection, no stovepipes etc. Loaded some Grendel rounds and fed and functioned with out issue in an obviously completely different firearm, so I will use them for both calibers

I bought 3 for my 6.5 grendel. I’ve tried 3 different brands of ammo and I can not get the mags to feed. I’d load the mags, put one in the magwell, release my bolt and no rounds will load. Rack my bcg, again they will not release a round to load into the rifle. Switched over to an E-Lander magazine and no problems. Wouldn’t waste your money on these, thankfully they were cheap so it’s not much of a loss

At first I could only load 9 rounds. I unloaded and reloaded it three times and was easily able to load it fully to 10-rounds. Another great mag from Amend2.